Total Pageviews

Greetings!

'A gaping silken dragon,/Puffed by the wind, suffices us for God./We, not the City, are the Empire's soul:/A rotten tree lives only in its rind.'

Sunday 16 August 2015

Civvie Hell Part II...

There was a good deal of filling and sanding required, and perhaps it that was all the greenstuff dust that addled my brain. Or perhaps I'm just addled. Anyway, I super-glued the wings together, using super-glue with hopes of avoiding too much filler for the wings. Actually, that part of the plan worked quite well, and I was able to sand the leading edges nicely, using the squeezed out super-glue as filler. All very nice. Only when it was all done did I realise that I had failed to add inserts into the wings that would act as the locating positions for the undercarriages. What the actual fork?! At this point I nearly opted for seppuku, or something similiar but not quite so eye-watering. In the end, I broke the wings open...

The rest of the build went reasonably well, but with the thing more or less complete, I wasn't looking forward to the decals. With good reason:

 
One of the things that the masters in the scale aviation press endlessly foam about is modern decals - 'lovely and thin' blah, blah. Yes, lovely and thin. Just ripe for folding on themselves!! I knew, of course, that there was no way to get the very long decals on in one piece, so I cut them into smaller sections. But, it wasn't enough, as the key pieces curled in the water on both axes.
 
The only solution was scrape the mess off when dry, and use a sharp marker pen.
 
Still, in the end, it looks ok:




 
 
But, enough of the shiny finished civvie stuff.
 
Next up, late mark Messerschmitt madness:


But, which one. Oddly, only one is short-run....

2 comments:

  1. Excellent outcome Stephen.

    She looks a real beast.

    ReplyDelete
  2. ...very impressive looking model build and finish...

    ReplyDelete